N. 4 vertical cylindrical wine makers 500 hl
Bottom bottom inclined plane connected to the 4 mm thick planking resting on n. 6
Closed boxed stainless steel legs complete with adjustable feet.
Cylindrical plating with butt welded ferrules with automatic TIG atmosphere
inert gas. Plating thickness: first ferrule 3 mm., Remaining ferrules 2 mm.
Decentralized "French-style" conical upper bottom connected to the plating 2.5 mm thick.
N. 1 heat exchange pocket h. 1175 mm., Positioned on the plating, formed by conduits
circumferential so that the liquid in question does not create preferential routes, complete with
1 ”GAS M. inlet sleeves and 1” GAS M. inlet sleeves Exchange surface sqm. 11 / ca.
Test pressure 4 BAR, max operating pressure 2 BAR.
N. 1 heat exchange pocket h. 750 mm., Positioned on the plating, formed by circumferential channels so that the liquid in question does not create preferential routes, complete with
1 ”GAS M. inlet sleeves and 1” GAS M. inlet sleeves Exchange surface sqm. 7 / ca.
Test pressure 4 BAR, max operating pressure 2 BAR.
Insulation of the pockets with high density polyurethane foam (35 kg / m³) with a thickness of 30
mm., coated in AISI 304 stainless steel thickness 0,8 mm., riveted.
Cleaning with pickling and total passivation.
ACCESSORIES:
Upper cover in off-center position DN 420 mm, complete with 1 double vent valve
DN 80 effect all in AISI 316 stainless steel.
Ø ¾ ”nitrogen connection complete with sleeve and cap.
Total drain with stainless steel ball valve machined from solid DIN M DN 80 / DIN F DN 80 on body
valve with drain screw complete with cap and chain.
Partial drain with stainless steel ball valve machined from solid DIN M DN 80 / DIN F DN 80 on body
valve with drain screw complete with cap and chain.
Reassembly tube Ø 85 mm., With fitting DIN 80, connected to the must spreading sprayer
removable, with DIN 80 fitting. Must spreading sprayer controlled by a gear motor 0.75 Kw
fixed speed.
Reassembly pump with stainless steel helical impeller and 2.2 kW electric motor
Internal stainless steel blade coupled with a planetary gearmotor group 5.5 Kw 4P 220/380 Volt,
50 Hz, 3 rpm output.
Electrical control panel with PLC for programming of pumping over, sprayer and
of the extractor in manual and automatic.
Plating thermometer with analog 1/2 "stainless steel sheath -10 / + 50 ° C scale with shank l = 200
mm.
Level dipstick made of polycarbonate tube Ø 24 mm., Stainless steel protection rod,
lower shut-off cock and return to the washing tube.
Washing tube in the central position of the removable tank with DIN DN65 fitting, lowered with
Ø 52 mm tube, DIN F. inlet and blind swivel with chain, washing sphere Ø 65 mm drilled in the
top.
Taste wine in ½ ”stainless steel
Rectangular guillotine door for total discharge of the marc (dim.:530 x 410 mm.) Ad
hydraulic opening at the bottom.
1/2 "probe holder pocket.
Nameplate.
Gangway support in lateral position to the plating.
Lifting eyebolts
The price is for each one
Per questione di privacy, solo sugli annunci gestiti, per visionare in tempo reale la provenienza e la disponibilità è necessaria la REGISTRAZIONE